Invacare Comfort-Mate Extra / Comfort-Mate Extra Base User Manual download pdf

SAVE THESE INSTRUCTIONS

NOTE: Check all parts for shipping damage. In case of

damage, DO NOT use. Contact Carrier/Invacare for fur-

ther instruction.

SAFETY SUMMARY

The following recommendations are made for the safe

and proper installation of the Comfort Mate Extra/

Comfort Mate Extra Base.

GENERAL WARNINGS

DO NOT install this equipment without first read-

ing and understanding this instruction sheet. If you

are unable to understand the Warnings, Cautions

and Instructions, contact a healthcare profes-

sional, dealer or technical personnel if applicable

before attempting to install this equipment - oth-

erwise, injury or damage may occur.

INSTALLATION WARNINGS

After ANY adjustments, repair or service and BE-

FORE use, make sure that all attaching hardware

is tightened securely.

USER WARNINGS

Skin condition should be checked frequently af-

ter the installation of any new seat.

Comfort-Mate Extra / Comfort-Mate Extra Base

Assembly, Installation and Operating Instructions

ATTACHING/REMOVING CUSHION

TO/FROM SEATING SURFACE

(FIGURE 1)

The cushion attaches to the wheelchair seating surface

using hook and loop fastening strips. The bottom of the

cushion cover is equipped with loop fastening strips. At-

tached to the loop fastening strips are double sided hook

fastening strips. Refer to the chart below to determine the

number of hook and loop fastening strips per cushion.

Cushion Width Loop Strips Hook Strips

14 - 19 inches 32

20 - 22 inches 42

NOTE: To remove the seat from a seating surface, re-

verse the following procedures.

NOTE: The seating surface can be one (1) of the follow-

ing: Seat upholstery, drop base or seat pan.

WARNING

Make sure the hook and loop fastening strips are

securely attached to the seating surface and to

the seat BEFORE using. If the seating surface does

NOT have hook or loop fastening strips, use cau-

tion when transferring in and out of the wheel-

chair otherwise the cushion may shift.

1. Determine whether the wheelchair seating surface

has hook or loop fastening strips.

2. Perform one (1) of the following:

If the wheelchair seating surface has:

A. LOOP FASTENING STRIPS - verify that the

double sided hook fastening strips are securely

attached to the loop fastening strips on the bot-

tom of the cushion.

B. HOOK FASTENING STRIPS - remove the double

sided hook fastening strips from the cushion.

C. NO HOOK OR LOOP FASTENING STRIPS -

remove the double sided hook fastening strips

from the bottom of the cushion.

NOTE: The zipper on the cushion should face the back

of the chair.

3. Align the front edge of the cushion with the front

edge of the seating surface.

4. Place the cushion on the wheelchair seating sur-

face. If necessary make sure that the hook and loop

fastening strips are securely connected.

IMPORTANT INFORMATION

The best way to avoid problems related to pressure sores

is to understand their causes and your role in a skin man-

agement program. The Comfort-Mate Extra Cushion and

Base are NOT designed for prevention of pressure sores.

Your therapist and physician should be consulted if you

have questions regarding individual limitations and needs.

As your needs become more complex, the seat evalua-

tion becomes more important.

All seats should be selected carefully. Working with your

therapist, and physician is the best way to assure that a

seat choice matches your individual needs.

INTRODUCTION

Comfort-Mate Extra Cushion

The Comfort-Mate Extra is designed to provide comfort

and support with features such as molded contour shap-

ing, dual layer foam, and water resistant coating.

Cushion Cover

The outer cover is made from a water repellant fabric to

protect the foam. The cover bottom is fabricated from a

waterproof, non-skid fabric. Regular cleaning and inspec-

tion of the cover is recommended. Refer to

SEAT IN-

SPECTION AND CLEANING in this instruction sheet.

1 2 3 4

Summary of Contents

Page 1 - USER WARNINGS

1SAVE THESE INSTRUCTIONSNOTE: Check all parts for shipping damage. In case ofdamage, DO NOT use. Contact Carrier/Invacare for fur-ther instruction.SAF

Page 2 - SEAT INSPECTION AND CLEANING

2ATTACHING/ADJUSTING THECUSHION/BASE MOUNTINGHOOKS TO BASE (FIGURE 2)NOTE: Refer to FIGURE 2 in this instruction sheet formounting hook locations.1. F

Page 3 - RELEASE RAIL CLAMP (FIGURE 3)

3INSTALLING/USING THE QUICKRELEASE RAIL CLAMP (FIGURE 3)InstallingNOTE: The quick release rail clamp is designed to fiteither a 1-inch diameter tube o

Page 4 - LIMITED WARRANTY

Invacare Corporation www.invacare.comUSA CanadaOne Invacare Way 5970 Chedworth Way Invacare is a registered trademark of Invacare Corporation.Elyria,