9000 SL9000 XT9000 XDT9000XT RECLINER9000 SERIESDEALER: THIS MANUAL MUST BE GIVEN TO THE USER OFTHE WHEELCHAIR.USER: BEFORE USING THIS WHEELCHAIR, REA
9000 Series 10 Part No. 1056953SECTION 1 GENERAL GUIDELINESGENERAL GUIDELINESSTABILITY - ALL MODELSWARNINGThe seat depth, back height/angle, seat angl
Part No. 1056953 11 9000 SeriesWARNING (CONTINUED)ANTI-TIPPERS (CONTINUED)Seat-to-floor angle of 6°: If changing the seat-to-floor angle to 6° , anti-
9000 Series 12 Part No. 1056953WARNING (CONTINUED)DO NOT TRAVERSE, CLIMB or GO DOWN ramps or slopes greater than 9°.DO NOT attempt to move up or down
Part No. 1056953 13 9000 SeriesTIRE PRESSUREWARNINGDO NOT use your wheelchair unless it has the proper tire pressure(p.s.i.). DO NOT overinflate the t
9000 Series 14 Part No. 1056953SAFETY/HANDLING OF WHEELCHAIRSSafety and Handling of the wheelchair requires the close attention of the wheelchair us
Part No. 1056953 15 9000 SeriesWARNINGDO NOT attempt to lift the wheelchair by any removable (detachable)parts. Lifting by means of any removable (det
9000 Series 16 Part No. 1056953REACHING, LEANING AND BENDING - FORWARDWARNINGDO NOT attempt to reach objectsif you have to move forward in theseat or
Part No. 1056953 17 9000 SeriesTipping - Curbs: Method 1 - Wheelchair With Step Tubes.Place foot on the step tube and begin to tilt the wheelchair tow
9000 Series 18 Part No. 1056953STAIRWAYSWARNINGALWAYS wear your seat/chest positioning strap. Inasmuch as the SEAT/CHESTPOSITIONING STRAP is an option
Part No. 1056953 19 9000 SeriesUNFOLDING AND FOLDING THE WHEELCHAIRWARNINGKeep hands and fingers clear of movingparts to avoid injury.DO NOT sit or tr
9000 Series 2 Part No. 1056953WARNINGWARNINGWARNINGDO NOT OPERATE THIS EQUIPMENT WITHOUTFIRST READING AND UNDERSTANDING THISMANUAL. IF YOU ARE UNABLE
9000 Series 20 Part No. 1056953Folding "Hammock or Sling Seat" Models.1. 9000 XT RECLINERS ONLY - Detach one end of the spreader bar from th
Part No. 1056953 21 9000 SeriesSAFETY INSPECTION CHECKLISTNOTE: Twice a year take your wheelchair to a qualified technician for a thorough inspection
9000 Series 22 Part No. 1056953SECTION 2 SAFETY INSPECTIONSAFETY INSPECTIONTROUBLESHOOTINGMAINTENANCEMAINTENANCE SAFETY PRECAUTIONSMAINTENANCE SAFETY
Part No. 1056953 23 9000 SeriesCAUTIONAs with any vehicle, the rear wheels, casters and tires should be checked periodi-cally for cracks and wear, and
9000 Series 24 Part No. 1056953SECTION 3 FRONT RIGGINGSFRONT RIGGINGSSection 3 - Front Riggings includes the following:Installing/Removing/Using the F
Part No. 1056953 25 9000 SeriesFIGURE 3 - IMPACT GUARDS/CALF STRAPCalf StrapIMPACT GUARDS/CALF STRAP (FIGURE 3)(FIGURE 3)(FIGURE 3)(FIGURE 3)(FIGURE 3
9000 Series 26 Part No. 1056953SECTION 3 FRONT RIGGINGSFRONT RIGGINGSHEEL LOOP REPLACEMENT (FIGURE 4)1. Pull the cam lock lever UP to theUNLOCKED posi
Part No. 1056953 27 9000 SeriesSECTION 3FRONT RIGGINGSFRONT RIGGINGSRAISING/LOWERING THE ELEVATING LEGRESTASSEMBLY (FIGURE 5)WARNINGEnsure hands and f
9000 Series 28 Part No. 1056953SECTION 4 ARMSARMSSection 4 - Arms includes the following:Adjusting Armrest HeightSwing-Back ArmsReplacing Desk/Full Le
Part No. 1056953 29 9000 SeriesNOTE: Armrest release lever MUST be in theunlocked position when placing armrest into thearm sockets.4. Lock the swing-
Part No. 1056953 3 9000 SeriesCONTENTSCONTENTSTABLE OF CONTENTSSPECIAL NOTES...
9000 Series 30 Part No. 1056953Arm Socket (INSIDE ofWheelchair Frame)Hex ScrewLocknutLeft Side of Wheelchair FrameFIGURE 5 - CONVERTING FROM SPACE SAV
Part No. 1056953 31 9000 SeriesSection 5 - Seat and Back includes the following:Replacing the Seat UpholsteryReplacing the Back UpholsteryAdjusting th
9000 Series 32 Part No. 1056953SEAT AND BACKSECTION 5REPLACING THE BACK UPHOLSTERYSCREW ON BACK UPHOLSTERY - 9000 SL (FIGURE 2)1. Flip swing back arms
Part No. 1056953 33 9000 SeriesADJUSTING THE SEAT WIDTHWARNINGAdjusting the seat width of the 9000SL, 9000XT, 9000XDT MUST beperformed by a qualified
9000 Series 34 Part No. 1056953Section 6 - Rear Wheels includes the following:Removing/Installing the Rear WheelsReplacing Rear Wheel HandrimReplacing
Part No. 1056953 35 9000 Series4. To reinstall the rear wheel onto the wheelchair, reverse STEPS 1-3.NOTE: Make sure axle spacer is between rear whe
9000 Series 36 Part No. 1056953REPLACING REAR WHEEL HANDRIM (FIGURE 2)WARNINGIf the wheelchair is equipped withpermanent axles, this procedureMUST be
Part No. 1056953 37 9000 SeriesADJUSTING THE QUICK-RELEASE AXLE (FIGURE 3)WARNINGNEVER use quick-release axles on the 9000 XT (models with offset axl
9000 Series 38 Part No. 1056953Section 7 - Front Casters includes the following:Installing/Replacing Six or Eight-inch Front Casters and ForksReplacin
Part No. 1056953 39 9000 SeriesFRONT CASTER MOUNTING ADJUSTMENTSWARNINGFront caster mounting adjustments MUST be performed by a qualifiedtechnician.RE
9000 Series 4 Part No. 1056953CONTENTSCONTENTSSECTION 7 - FRONT CASTERS ... 38INSTALLING/REPLACIN
9000 Series 40 Part No. 1056953Section 8 - Anti-tippers/Wheel Locks includes the following:Installing/Adjusting the Anti-TippersUsing/Adjusting the Pa
Part No. 1056953 41 9000 SeriesSECTION 8ANTI-TIPPERS/WHEEL LOCKSANTI-TIPPERS/WHEEL LOCKSADJUSTING (FIGURE 2)1. Press the release buttons on the wheele
9000 Series 42 Part No. 1056953USING/ADJUSTING THE PATIENT OPERATED WHEELLOCKSUSING THE PATIENT OPERATED WHEEL LOCKS (FIGURE 3)WARNINGDO NOT attempt t
Part No. 1056953 43 9000 SeriesSECTION 8ANTI-TIPPERS/WHEEL LOCKSANTI-TIPPERS/WHEEL LOCKS4. Securely tighten the bolt and locknut or socket screws secu
9000 Series 44 Part No. 1056953Section 9 - Recliner includes the following:Recliner OperationReplacing the Headrest PillowReplacing Headrest/Back Upho
Part No. 1056953 45 9000 SeriesFIGURE 1 - RECLINER OPERATIONReleaseHandleLevelSurfaceLevelSurfaceRECLINED POSITIONUPRIGHT POSITIONWheelchairWheelchai
9000 Series 46 Part No. 1056953REPLACING THE HEADREST PILLOW (FIGURE 2)1. Unfasten straps of headrest pillowfrom behind headrest upholstery.2. Secure
Part No. 1056953 47 9000 SeriesADJUSTING HEADREST/BACK UPHOLSTERY TENSION(FIGURE 4)1. Rotate the spreader bar either:COUNTERCLOCKWISE (awayfrom back u
9000 Series 48 Part No. 1056953RECLINERSTORING/REPLACING THE SPREADER BARSTORING (FIGURE 5)NOTE: The 9000XT RECLINER is folded foreither storage or tr
Part No. 1056953 49 9000 SeriesSECTION 9RECLINERRECLINERINSTALLING THE ANTI-TIPPERS (FIGURE 15)1. Install the anti-rattles onto the rearframe tubes if
Part No. 1056953 5 9000 SeriesSPECIAL NOTESWARNING/CAUTION notices as used in this manual apply to hazards orunsafe practices which could result in pe
9000 Series 50 Part No. 1056953RECLINERSECTION 9RECLINERREMOVING/INSTALLING THE REAR WHEELSNOTE: If replacing the same size rear wheel, this procedure
Part No. 1056953 51 9000 SeriesUSING/ADJUSTING THE WHEEL LOCKSNOTE: For Using and/or Adjusting of Patient Oper-ated Wheel Locks, refer to USING/ADJUST
9000 Series 52 Part No. 1056953SECTION 9 RECLINERRECLINERINSTALLING THE TELESCOPING I.V. RODINSTALLING THE TELESCOPING I.V. ROD HOLDER (FIGURE 12)1. R
Part No. 1056953 53 9000 SeriesINSTALLING THE TELESCOPING I.V. ROD SUPPORT TUBE(FIGURE 14)NOTE: The I.V. rod holder must already be mounted to the sid
9000 Series 54 Part No. 1056953OPTIONSSECTION 10OPTIONSSection 10 - Options includes the following:Installing/Cleaning the Telescoping I.V. Rod/O2 Hol
Part No. 1056953 55 9000 SeriesINSTALLING THE SOLID FOLDING SEAT (FIGURE 2)1. Remove the existing seat upholstery from the wheelchair. Refer to REPLA
9000 Series 56 Part No. 1056953OPTIONSSECTION 10OPTIONSINSTALLING THE AMPUTEE BRACKET - SUPER HEMIMODELS ONLY (FIGURE 4)1. Remove the plug button or
Part No. 1056953 57 9000 SeriesINSTALLING THE AMPUTEE BRACKET - ALL MODELSEXCEPT SUPER HEMI9000SL/XT (FIGURE 5)1. Refer to the following chart or FIGU
9000 Series 58 Part No. 10569539000XDT (FIGURE 6)1. Refer to the following chart or FIGURE 6 to determine the mounting position of theamputee bracket:
Part No. 1056953 59 9000 SeriesLIMITED WARRANTYPLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITHFEDERAL LAW APPLICABLE TO PRODUCTS MANUF
9000 Series 6 Part No. 1056953IMPORTANT NOTICEThe wheel locks on this wheelchair have beenpre-set at the factory to comply with theVeterans Adm
Invacare Corporation www.invacare.comUSA CanadaOne Invacare Way 570 Matheson Blvd E Unit 8 Invacare is a registered trademark ofElyria, Ohio USA Miss
Part No. 1056953 7 9000 Series9000 SL 9000 XTOverall Width: 23 or 25-inches 21, 22, 23, 25, 27, or 29-inchesOverall Depth: 43-1/2-inches(With Front Ri
9000 Series 8 Part No. 10569539000 XT RECLINER 9000 XDTOverall Width: 23, 25, 27, 28, 29 or 31-inches 23, 25, 27, or 29-inchesOverall Depth: 46-inches
Part No. 1056953 9 9000 SeriesSection 1 - General Guidelines includes the following:Information for Healthcare Professionals/AssistantsStability - All
Comments to this Manuals