Invacare Top End Terminator Jr. User Manual download pdf (Page 28)

WHEELSPROCEDURE 7

INSTALLING QUAD-RELEASE

AXLES (FIGURE 3)

1. Remove rear wheel and the EXISTING quick-release

axle from the wheelchair. Refer to

REMOVING/IN-

STALLING REAR WHEELS in this procedure of the

manual.

2. Remove EXISTING quick-release axle from rear

wheel.

3. Insert NEW quad-release axle through rear wheel

hub.

4. Slide locking collar onto quad-release axle until it is snug

against rear wheel and tighten securely with allen screw.

5. Reinstall rear wheel and the quad-release axle onto

the wheelchair. Refer to

REMOVING/INSTALLING

REAR WHEELS in this procedure of the manual.

6. Flip the handle of the quad-release axle down to re-

lease the detent pin ensuring that the locking pins

are fully released.

7. If detent pin does not fully release, proceed to

ADJUST-

ING QUAD-RELEASE HANDLE IN AND/OR OUTin

this procedure of the manual.

8. Repeat STEPS 1-7 for the opposite rear wheel.

FIGURE 3 - INSTALLING QUAD-RELEASE AXLES

3. Make the following adjustments:

If the quad-release handle is not releasing the lock-

ing pins completely, rotate the quad-release handle

approximately one-quarter (1/4) turn CLOCKWISE.

If the quad-release handle hits the spokes of the rear

wheel when assembled, rotate the quad-release

handle approximately one-quarter (1/4) turn COUN-

TERCLOCKWISE.

4. Tighten the locking screw.

5. Reinstall the rear wheel and quad-release axle onto

the wheelchair. Refer to

REMOVING/INSTALLING

REAR WHEELS in this procedure of the manual.

6. Flip the handle of the quad-release axle down to re-

lease the detent pin ensuring that the locking pins

are fully released.

7. Repeat the above procedures until the quad-release

axle locks correctly.

Removing Play From Rear Wheels

NOTE: The adjusting locknut on the quick-release axles

originally performed this function.

1. With the rear wheel and quad-release axle still mounted

onto the wheelchair, make the following adjustment:

Tighten the length adjusting screw until there is no

in and out movement of the quad-release axle and

rear wheel.

FIGURE 4 - ADJUSTING QUAD-RELEASE HANDLES

Length

Adjustment

Screw

REMOVING PLAY

FROM REAR

WHEELS

ADJUSTING QUAD-

RELEASE HANDLE IN/

AND OR OUT

Adjustable Axle

Position

Camber Bar

Rear Wheel

Hub

Quad

Release

Axle

Allen

Screw

NOTE: End of

Quad Release

axle shown for

reference only.

It is not visible

when inserted

into camber bar

Locking

Collar

Quad Release

Handle

Locking Pins

Camber Bar

Locking

Screw

ADJUSTING QUAD-RELEASE

HANDLES (FIGURE 4)

In and/or Out

1. Remove rear wheel and the quad-release axle from

the wheelchair. Refer to

REMOVING/INSTALLING

REAR WHEELS in this procedure of the manual.

2. Loosen the locking screw.

HANDRIM REPLACEMENT

(FIGURE 5)

1. Remove the rear wheel from the wheelchair. Refer to

REMOVING/INSTALLING REAR WHEELS in this

procedure of the manual.

Adjusting

Locknut (On

Quick-Release

Axle)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Comments to this Manuals

No comments

Invacare Top End Terminator Jr. User Manual Page 28

Comments to this Manuals

Related products and manuals for Computer desks Invacare Top End Terminator Jr.