Invacare 9805P User Manual download pdf (Page 18)

SECTION 4—ASSEMBLY

Portable Patient Lift and Sling 18 Part No 1024492

Base Shifter Handle Assembly

NOTE: For this procedure, refer to

FIGURE 4.3.

1. Insert the base shifter handle into the

cam lock assembly at the back of the

base.

2. Align the holes of the shifter handle

and cam lock assembly.

3. Tighten the thumbscrew to secure the

shifter handle in place.

NOTE: This should prevent the base shifter

handle from being removed.

FIGURE 4.3 Base Shifter Handle Assembly

Swivel Bar Attachment with Mounting Bracket

NOTE: For this procedure, refer to FIGURE 4.4.

1. Push the pin and washers up through the swivel bar pad.

2. Line-up hole in pin with mounting bracket holes and secure with shoulder screw and

nut provided.

NOTE: The swivel bar has hooks on both ends to accept the hardware used to attach the sling that

supports the patient during lift. The swivel bar pad should remain in place during normal use.

FIGURE 4.4 Swivel Bar Attachment with Mounting Bracket

Thumbscrew

Base Shifter Handle

Cam Lock

Assembly

Swivel Bar Pad

Nut

Shoulder

Screw

NOTE: Make sure Pin and Washers are completely

pushed up through the Swivel Bar Pad.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

No comments

Invacare 9805P User Manual Page 18