Invacare 9000 Topaz User Manual download pdf (Page 33)

5 FRONT RIGGINGS

Part No 1100869 33 Invacare®9000 Topaz™Wheelchair

4. While sitting in the wheelchair, adjust the legrest to the correct height. Refer to Adjusting Elevating Legrest Assembly

on page 33.

Removing

1. Ensure the elevating legrest is in the lowered position. Refer to

Adjusting Elevating Legrest Assembly

on page 33.

2. To release the elevating legrest assembly push the legrest release

handle toward the inside of the wheelchair (facing the front of the

wheelchair) and swing the legrest assembly to the outside of the

wheelchair.

3. Lift the elevating legrest assembly off the hinge pins.

FIGURE3 Installing/Removing Elevating Legrest Assembly

5.4 Adjusting Elevating Legrest Assembly

Adjusting Footrest Height

1. While sitting in the wheelchair, remove the two bolts and locknuts securing the lower footrest assembly to the elevating legrest assembly and

move the lower footrest assembly up or down until the desired height is achieved.

2. Secure the lower footrest assembly to the elevating legrest assembly with the two bolts and locknuts. Securely tighten.

3. Repeat STEPS 1-2 on remaining legrest assembly.

Adjusting Calfpad

1. Remove the two mounting screws securing the calfpad to the calfpad support of the elevating legrest assembly.

2. Slide the Calfpad up or down until the desired position is obtained.

Elevating Legrest Assembly

Legrest Release Lever

Hinge

Pins



For this procedure, refer to FIGURE4 on page 34.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 67 68

No comments

Invacare 9000 Topaz User Manual Page 33