Invacare 9000 Topaz User Manual download pdf (Page 47)

10 ANTI-TIPPERS/WHEEL LOCKS

Part No 1100869 47 Invacare®9000 Topaz™Wheelchair

10 Anti-tippers/Wheel Locks

10.1 Installing Anti-Tippers



WARNING

After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise

injury or damage may occur.



WARNING

Inasmuch as anti-tippers are an option on this wheelchair (you may order with or without the anti-tippers), Invacare

strongly recommends ordering anti-tippers as an additional safeguard for the wheelchair user.

Anti-tippers are specific to the different rear wheels and/or seat-to-floor heights. Refer to the following charts for correct

usage and adjustment. If these requirements cannot be achieved, DO NOT use the wheelchair. Contact an Invacare dealer

or qualified technician. Any changes to the seat-to-floor angle or seat-to-floor height may require different anti-tippers. The

correct anti-tippers must be ordered to maintain a 1½ to 2-inch ground clearance.

Anti-tippers MUST be fully engaged. Ensure that the locking pin of the anti-tipper fully protrudes out of the hole on the side

of the wheelchair frame. Ensure both anti-tippers are adjusted to the same height.

ALWAYS use anti-tippers. When outdoors on wet, soft ground or on gravel surfaces, anti-tippers may not provide the

same level of protection against tipover. Extra caution must be observed when traversing such surfaces.



For this procedure, refer to FIGURE1 on page 49.



To ensure the correct model anti-tipper is used refer to the following chart. Measurements for anti-tippers are

approximate.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

No comments

Invacare 9000 Topaz User Manual Page 47