Invacare TRACER EX2 User Manual download pdf (Page 35)

5 FRONT RIGGINGS

Part No 1110546 35 Invacare

Tracer™ EX2 Wheelchair

Fixed Frame

1. Remove impact guards and/or calf strap, if necessary.

2. Loosen, but do not remove the bolt and locknut that secure the

lower footrest assembly to the upper footrest support.

3. Reposition the lower footrest assembly to the desired height.

4. Securely tighten the bolt and locknut.

5. Repeat this procedure for the other footrest, if necessary.

6. Replace impact guards and/or calf strap, if necessary.

5.3 Raising/Lowering Elevating Legrest Assembly

1. To raise the elevating legrest, the assistant should hold the support

tube and raise the elevating legrest until the desired height is

obtained.

2. To lower the elevating legrest, perform the following:

A. Support user leg with one hand.

B. Push release lever downward with other hand.

C. Gently, lower user leg down and rest against the legrest.

FIGURE4 Adjusting Footplate Height - Fixed Frame

FIGURE5 Raising/Lowering Elevating Legrest Assembly



WARNING

Ensure hands and fingers are clear of elevating legrest

mechanism before pushing release lever to lower the

elevating legrest. Otherwise injury may occur due to

pinch points.

The wheelchair user’s leg MUST be supported by an

assistant before attempting to lower legrest.

Bolt and

Locknut

Wheelchair Frame

Footplate

Assembly

Release Lever

Support Tube

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 63 64

No comments

Invacare TRACER EX2 User Manual Page 35