Invacare TRACER EX2 User Manual download pdf (Page 61)

12 OPTIONS

Part No 1110546 61 Invacare

Tracer™ EX2 Wheelchair

12.2 Installing Crutch and Cane Carrier

1. Slide the clamp with the base attached over the end of the step tube of the wheelchair. Ensure the base is towards the inside of the wheelchair.

2. Position the base parallel to the step tube.

3. Securely tighten the locknut that secures the base to the step tube

of the wheelchair.

4. Remove the upper back upholstery screw and washer.

5. Align the strap with the back upholstery screw mounting hole.

6. Reinstall the back upholstery screw and washer and secure the

strap to the wheelchair.

7. The base cleans easily with any chrome or glass cleaner. The strap

can be cleaned with mild soap and water.

FIGURE2 Installing Crutch and Cane Carrier



WARNING

Check base weekly to ensure proper placement.

When loading the crutch/cane carrier, ensure items are securely placed into the base. Also ensure that there is no

interference with folding the wheelchair, the rear wheels, or the swing-back arms.

Strap MUST be securely fastened while carrying items.

NEVER insert or remove items while wheelchair is moving.



CAUTION

Base should be parallel to step tube to avoid

bending spokes when folding the wheelchair.

Step

Tube

Locknut

Clamp

Base

Strap

1 2 ... 56 57 58 59 60 61 62 63 64

No comments

Invacare TRACER EX2 User Manual Page 61