Invacare PRONTO R2-250 User Manual Page 12
- Page / 48
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
12
SAFETY INSPECTION CHECKLIST
This Procedure Includes the Following:
Safety Inspection Checklist
Troubleshooting
Checking Battery Charge Level
Initial adjustments should be made to suit personal body structure and preference. Thereafter follow these maintenance procedures:
ITEM
GENERAL (MECHANICAL TROUBLESHOOTING)
l Wheelchair rolls straight (no excessive drag or pull to one side).
CLOTHING GUARDS
l Ensure all fasteners are secure.
ARMS - (PROCEDURE 4)
l Secure but easy to release; adjustment levers engage properly.
l Adjustable height arms operate and lock securely.
FLIP BACK ARMRESTS - (PROCEDURE 4)
l Do not interfere with tires when rolling.
l Pivot points free of wear and looseness.
SEAT AND BACK UPHOLSTERY
l Inspect for rips or sagging.
CAPTAIN'S SEAT
l Captain's Seat is secured to the wheelchair frame.
l HIGH BACK CAPTAIN'S SEATS ONLY - Limit switch prevents the wheelchair
from operating in any recline position over 114
o
RELATIVE TO THE SEAT FRAME.
WARNING: NEVER operate the wheelchair while in any recline position
over 114
o
RELATIVE TO THE SEAT FRAME. If the limit switch does not
stop the wheelchair from operating in a recline position over 114
o
RELA-
TIVE TO THE SEAT FRAME, do not operate the wheelchair. Have the
wheelchair adjusted by a qualified technician.
DRIVE WHEELS
l Axle bolts and locking tab washers are secure.
l No excessive side movement or binding when lifted and spun when disen-
gaged (free-wheeling).
FRONT STABILIZERS
l Bolts are tight.
l Adjusted for desired ride. WARNING: MUST be adjusted by qualified technician.
CASTERS - (PROCEDURE 8)
l Inspect wheel/fork assembly for proper tension by spinning caster; caster
should come to a gradual stop.
l Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
CAUTION: As with any vehicle, the wheels and tires should be checked
periodically for cracks and wear, and should be replaced.
CASTER/WHEEL/FORK/HEAD TUBE - (PROCEDURE 8)
l Ensure all fasteners are secure.
TIRES - (PROCEDURE 8)
l Inspect for flat spots and wear.
l If pneumatic tires check for proper inflation.
CAUTION: As with any vehicle, the wheels and tires should be checked
periodically for cracks and wear, and should be replaced.
BATTERIES- (PROCEDURE 11)
l Check for cracks and wear on terminal caps and battery clamp covers.
l Check that terminal caps and battery clamp covers are properly secured to
the battery terminals.
CLEANING
l Clean upholstery and armrests.
INITIALLY
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
INSPECT/
ADJUST
WEEKLY
X
X
X
X
X
INSPECT/
ADJUST
MONTHLY
X
X
X
X
X
X
INSPECT/
ADJUST
PERIODICALLY
X
X
X
X
X
X
X
X
X
X
SAFETY INSPECTION/TROUBLESHOOTINGPROCEDURE 2
T
R
O
U
B
L
E
S
H
O
O
T
I
N
G
S
A
F
E
T
Y
I
N
S
P
E
C
T
I
O
N
NOTE: Every six (6) months take your wheelchair to a qualified dealer for a thorough inspection and servicing. Regular cleaning will
reveal loose or worn parts and enhance the smooth operation of your wheelchair. To operate properly and safely, your wheelchair
must be cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
- R2-250 Series 1
- SPECIAL NOTES 2
- TABLE OF CONTENTS 3
- SPECIFICATIONS 4
- GENERAL WARNINGS 5
- PROCEDURE 1GENERAL GUIDELINES 7
- SAFETY/HANDLING OF 8
- WHEELCHAIRS 8
- GENERAL GUIDELINESPROCEDURE 1 10
- BATTERY BOX SHIPPING INSERTS 11
- SAFETY INSPECTION CHECKLIST 12
- TROUBLESHOOTING - ELECTRICAL 13
- TROUBLESHOOTING - MECHANICAL 13
- CHECKING BATTERY CHARGE LEVEL 13
- FOOTRESTS (FIGURE 1) 15
- ADJUSTING FOOTREST HEIGHT 15
- INSTALLING/REMOVING 15
- ELEVATING LEGRESTS (FIGURE 5) 16
- ADJUSTING REMOVABLE 18
- FOOTBOARD 18
- REMOVING THE REMOVABLE 19
- FOOTBOARD ASSEMBLY FROM 19
- THE WHEELCHAIR (FIGURE 11) 19
- ADJUSTING THE ONE PIECE 20
- FOOTBOARD - HEIGHT, ANGLE 20
- AND DEPTH 20
- INSTALLING/REMOVING THE ONE 20
- PIECE FOOTBOARD (FIGURE 12) 20
- REMOVING/INSTALLING THE 21
- CALF-PADS (FIGURE 16) 21
- ADJUSTING THE CALF-PADS 21
- FOOTREST ANGLE ADJUSTMENTS 26
- (FIGURE 23) 26
- INSTALLING/REMOVING FLIP BACK 27
- ARMRESTS (FIGURE 1) 27
- ADJUSTING FLIP BACK ARMRESTS 27
- (FIGURE 2) 27
- ADJUSTING CAPTAIN'S SEAT 28
- ARMRESTS 28
- PREPARING MKIV JOYSTICK FOR 30
- USE (FIGURE 1) 30
- REPOSITIONING MKIV JOYSTICK 30
- REPOSITIONING BATTERY 31
- CHARGER CONNECTOR (FIGURE 3) 31
- FUSE REPLACEMENT (FIGURE 4) 31
- REPLACING BATTERY BOX 32
- RETAINING STRAP (FIGURE 1) 32
- 3/4-inch Minimum 32
- ENGAGING/DISENGAGING MOTORS 33
- WITH MOTOR LOCKS (FIGURE 3) 33
- ADJUSTING FORKS (FIGURE 4) 34
- ADJUSTING THE STABILIZER 34
- (FIGURE 5) 34
- REMOVING/INSTALLING SHROUDS 35
- (FIGURE 1) 35
- REPLACING BACK OR HEADREST 36
- UPHOLSTERY (FIGURE 2) 36
- RECLINER OPERATION (FIGURE 1) 36
- ADJUSTING BACK OR HEADREST 37
- UPHOLSTERY (FIGURE 3) 37
- BATTERIES INTO/FROM BATTERY 38
- BOXES (FIGURE 1) 38
- CONNECTING BATTERY CABLES 39
- R2-250 Series 43
- TOOL QUANTITY COMMENTS 44
- Battery Charger 1 Supplied 44
- REPLACING BATTERIES 45
- INSTALLING/REMOVING BATTERY 45
- BOXES (FIGURE 9) 45
- LIMITED WARRANTY 47
Related products and manuals for Computer desks Invacare PRONTO R2-250
(44 pages)© 2020, manymanuals.com. All rights reserved. | 0.132 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals