Invacare TRACER EX2 User Manual download pdf (Page 48)

8 REAR WHEELS

Invacare

Tracer™ EX2 Wheelchair 48 Part No 1110546

8.3 Replacing Rear Wheel Handrim

1. Remove the rear wheel from the wheelchair. Refer to Removing/

Installing Rear Wheels on page 46.

2. Remove the mounting screws that secure the handrim to rear wheel.

3. Remove the existing handrim.

4. Secure the new handrim to the rear wheel with mounting screws.

Tighten securely.

5. Reinstall rear wheel to the wheelchair. Refer to Removing/Installing

Rear Wheels on page 46.

6. Repeat STEPS 1-5 for the opposite rear wheel if necessary.

FIGURE2 Replacing Rear Wheel Handrim



WARNING

If the wheelchair is equipped with permanent axles,

this procedure MUST be performed by a qualified

technician.



WARNING

Make sure the detent pin and detent balls of the

quick-release axles are fully released and

protruding out of the hole before operating the

wheelchair.

Keep detent balls clean.

Mounting Screw

Rear Wheel

Handrim

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

No comments

Invacare TRACER EX2 User Manual Page 48